- Total 84 Pages -
Custom transmission finned oil tank for Project GT-R35
The in-house design custom transmission finned oil tank have just been completed, currently on testing for fitments.
The oil tank is a complete replacement from the OEM item, machined with build-in heat sink fins to help faster cooling.
While the transmission oil cooler is in the development stage.
Turbo back and De-cat centre pipe for Project R-35
KC Custom in-house design Turbo back and de-cat centre Y-pipe is finally complete. Using 304 grade stainless steel for the pipe work.
The Turbo back de-cat pipes measured at 70mm in diameter and the same for the centre Y-pipe and increase to 80mm where the pipes join together.
Full testing for fitments and performance will be carry out once fully fitted.
The Turbo back pipes are fully heat warp to reduce exhaust gas temperature.
Engine oil sump extension for Project GT-R35
The custom Engine oil tank is currently in development with a planned increase in depth by 20mm, in order to cope with the enlarged engine oil tank, the engine oil sump pipe has also been extended by 17mm.
Exedy triple plate clutch kit for 600hp Impreza STI 8
KC Racing will carry out an intensive test work on the Exedy triple plate clutch kit for the Subaru Impreza STI 8 to see if the kit is as good as it is claim to be.
The triple plate clutch is rated capable to handle power up to 650hp
ZIC Race photos
Just a few photos of our race spec EVO 8 during last month race at ZIC. The car was driven by our company director.
The car had a little problem at the beginning of the race, but our team mechanics quickly solved the problem and managed to complete the full race in the end without further drama.
Used performance parts on sale:
-: Apexi Power FC ECU for EVO 7 HKD $4,000
-: Apexi RSM Rev/Speed Meter HKD $1,700
-: Apexi Power FC ECU for GT-R 34 HKD $4,800
_: HKS SLD Type III for Mazda RX-8 HKD $1,300
Stock clearance 2
New Apexi Power FC ECU with the FC Commander for sale - HKD 4,800
New Ground Effector for Alphard - HKD $900
Ohlins Suspension kit for Project GT-R35
KC Racing have developed custom mounting kit to be used with the Ohlins Suspension kit for the Project GT-R 35.
All the mounting points are totally custom design to fit onto the R35.
The new suspension kit enable the R35 to be more stable at high speed cornering and a lower ride height to the standard kit.
Another custom design work is the reposition of the new air in-take kit. Two 150mm HKS power air flow kit were placed directly behind the front structure beam to allow clean fresh air directly flow into the engine, in effect allowing much quicker respond from the engine and increase power.
Custom fuel rail for GT-R35
The custom fuel rail for the Project GT-R 35 has just been completed, test for any signs of gaps and fitments now under way to ensure no leakage coming from the custom fuel rail.
The custom fuel rail have an internal diameter of 15mm compare to the OEM fuel rail of just 10mm. a full 50per cent increase for the fuel supply to ensure enough fuel for any future power upgrade.
UniChip powered Z4 330i
KC Racing is very delighted to be able test the power of the UniChip work its magic on the BMW Z4.
The test were carried out completely on the in-house DynaPack machine.
The end result were a positive power gain of 14hp from a simple engine remap. Most of the added power were gained at the higher RPM range and the gear change is now much smoother thanks to the remap.